Tag Archives: solids control equipment

GN Survive with improved solids control technology and better price

GN Solids Control has shown much better confidence to survive in the lower oil price winter. Even, the oil market is very down, GN continuously invest in the product research, product improvement, new technology solids control equipment, and optimize on customer experience.

GN is committed to publish the latest model thermal desorption unit in the first quarter of 2017;

GN is committed to publish the first generation of three phase centrifuge, 14inch bowl centrifuge for oily sludge treatment in first quarter of 2017.

solids-control

GN is committed to publish the hydraulic centrifuge before the end of 2016

GN have a wish and target to become the GN Brand can provide complete solution from the beginning to the end, both for solids control and drilling waste management. The client can have one stop experience, much convenient, high efficient and good price.

According to the sales recently, the first half year of 2016, the popular product now is decanter centrifuges, vertical cuttings dryer, shaker screen, shale shaker and liquid mud plant.

1) Decanter centrifuge is used for solids control. Even the oil price is much lower, there are still some drilling contractor working, and need the centrifuges working in mud cleaning systems. One drilling rigs require at least 2 sets decanter centrifuges, lower speed centrifuge + high speed centrifuges, to meet the requirements from mud engineer.

2) Vertical cuttings dryer. This cuttings dryer can recover the valuable oil based mud and return it back to the active mud tank system. The separated dry cuttings can be transported to Thermal desorption unit for final treatment.

3) Shaker screen is wearing parts for shale shaker. Even the unit price is only less than hundred dollars, but the screen qty is relatively large, the value is larger than other parts. We sell replacement screens for different model shale shakers.

4) Liquid mud plant. This can service for several drilling rigs, to supply ell prepared drilling mud for direct use.

Mobile mud system transportation wit 40 foot trucks

GN Solids Control can offer solids control gear, drilling waste management gear and mud tank system. Regarding the mud tank system, here we talk about stream-lined drilling  mud system for HDD, water well drilling and so on
Unlike oil drilling internet site, the HDD project or perhaps water well drilling undertaking may stay in one web-site for only two weeks or a month, they will move from one site to another. Almost all of client prefer to mobile mud mixing system which can be locked upon 20ft truck or 40ft truck.
Mobile mud system
Recently, we have one particular client from West South africa who is busy with normal water well drilling to improve the regional water situation. And he have to have 40ft truck mobile mud system to working together with the actual Drillmec rig from Italia. The mud system such as below parts:
1) a few panel shale shaker GNZS73E-DZ, this is the most popular shaker product for non oil gasoline drilling field. The shaker is much mature product that have been working in market for over a decade. Even, we do some betterment every year, it is still vintage model and we will not end the manufacturing of this unit.
2) 3 panel mud cleaner GNZJ703E-D1S8N. This is mix of shale shaker, desander cone and desilter cones. This is certainly compact design three in a unit with much better functioning performance. If the client would rather cheaper price desander device and desilter unit, you can offer desander and desilter without down steam shale shaker. But the performance probably that good.
3) 3 pieces centrifugal pump installed inside the tank recess position. 1 centrifugal pump for giving the desander cones, one particular centrifugal pump for providing the desilter cones along with another one for mixing hopper.
4) 1 set submersible slurry pump for providing the shale shaker, sucking by mud pit. This pump is much more anti-corrosive than centrifugal pump.
5) 1 placed 10m mud tank to aid all equipment above. Along with the tank system can be put within a 40ft truck for method of travel.

ATEX/DNV Decanter Centrifuge deliver to Europe

Europe marketplace has much higher standard with regard to equipment importing from exterior countries. As China primary brand, GN continuously upload solids control equipment to help Europe clients with greater standard and high quality items. This month, we just give some sets of centrifuges with Atex/DNV certificate.

GN Solids Control Decanter Centrifuge with below features:
Type: GNLW363CG-VFD
Compliance with The european union CE certification
Electrical control panel compliance with ATEX EX proof certification
Working out with ears compliance with DNV GL certification

GN Solids have been working in solids control equipment & mud cleaning system field for many years. The production method is very strict and conformity with API Q1, ISO 9001, HSE etc . restrictions. We only source coming from top brand component substance and our equipment high quality is also premium with excellent performance.
decanter centrifuge
Decanter centrifuge is critical equipment working for oil drilling mud system. Most of buyer will need 2 sets centrifuge for operation. The combined centrifuge system including a single set high speed centrifuge regarding lower gravity solids treatment; one set lower rate or middle speed centrifuge for high gravity solids removal; screw pump intended for feeding the dual centrifuge will be also concluded, along with telescopic high skid to get installation. We have one consumers from West Africa, that they bought 2 sets GNLW363 14inch bowl centrifuge, the first is fix speed centrifuge; the opposite one is variable speed centrifuge. The fix speed centrifuge with middle speed 2200RPM, much better for middle dimensions solids removal. The changing speed centrifuge can be used several size particles separation simply by different speed. The adjustable speed centrifuge VFD control panel can adjust the pan speed, conveyor speed along with pump feeding speed really flexible.

Except the 14inch bowl centrifuge, GN Solids control also has other unit centrifuge for option:
in search of inch bowl centrifuge with regard to diamond/ mining drilling
18inch bowl centrifuge for rapidly drilling
22inch bowl centrifuge for some special requirements.

When you need some centrifuges or solids control equipment, pls email us freely.

GN High Speed Decanter Centrifuge Used for Waste Water Separating

As more and more GNLW series decanter centrifuges are employing in oil and gas drilling in addition to drilling waste management devices, GN Solids Control occasionally are regarded as a professional centrifuge manufacturer, and some clients are utilizing GN centrifuge in additional industries as sludge parting, waste water separation along with other applications.
Comparing with drilling waste management systems, the actual separation of waste h2o need the decanter centrifuge to be effective at a comparably lower differential speed, which is also the speed with regard to conveying the solids cycle in the bowl.
Why? Obtain a high differential speed?
1 ) First of all, a high speed to get conveying the material may combine the liquid and the solids, and the whole decanter centrifuge can be working as a mud agitator, in this case, the centrifuge is not really an efficient separation equipment.

decanter centrifuge
second . Secondly, in order to treat the particular waste water, the end end user need to add some chemical in the material, to change the size possibly the chemical composition of the squander water. In condition of a superior differential speed, the practical chemicals may be discharged alongside the liquid at the liquid shop.
3. Thirdly, when there is substances in the material to be dealt with, and the centrifuge’s differential pace is high, there would be rather much of bubbles and foams. It would give negative have an impact on on the separation result.

GNLW363CG-VFD is an idea choice for that waste water separation plans, because this is the highest normal decanter centrifuge internationally, GN uses best material for any decanter centrifuge bowl while SS2205 which is more good and more anti-corrosive.
And for the particular control panel, GN possesses positive pressurized control panel for easily choose the acceptable bowl speed and differential speed. When the aimed dish speed and differential pace are entered into the PLC control panel, the program may calculate out a suitable rear motor speed automatically.
Might you need more information, pls speak to GN Solids Control.

Often the Return of the King-GN Solids America Back from OVER-THE-COUNTER

GN Solids America LLC just got back from the 2016 OTC show. Many old and also new friends came to GN booth and discussed hotly on all those GN accessories exhibited.
As a top top manufacturer from China, GN Solids America LLC is a part company of GN Solids Control. It’s been a convention for GN attending OVER THE COUNTER with two booths annually. In the 2016 OTC display, GN Solids Control possesses a booth in Center, everywhere one decanter centrifuge GNLW363 and one cuttings dryer GNCD930D are exhibited. GN Solids America also has another interpreting booth in Arena to exhibit shale shaker and shaker displays.

2016 OTC decanter centrifuge
2016 OTC decanter centrifuge

GN Solids America got sent huge invitation words to GN valuable buyers before the opening of 2016 OTC show. Many clients found see GN solids control and drilling waste management equipments especially. We’re extremely glad to say there were 2 purchase orders on the decanter centrifuges made during this display.
GNLW363 decanter centrifuges are generally widely used in over 61 countries; the excellent working efficiency and convincing quality support GN to get many requests before. GN decanter centrifuge has two operating function: one is fix speed along with a hydraulic coupling; the other is actually a variable speed which can alter speed easily on the control panel.
Two decanter centrifuges were purchased, and some various other GN equipments were also sketched great attention. Many companies demonstrated keen interest on GN cuttings dryers to separate their very own slurry and recycle waters. GN shaker screens had been also purchased during this show by simply some drilling companies. We could pretty confident that these drilling companies will keep acquiring from GN after they examination GN shaker screens.
Many solids control equipments for instance shale shakers, shear pump, decanter centrifuges and also shaker screens are stocking in Houston warehouse. For that shaker screens that use a good deal, GN keeps delivering via Chinese factory in order to provide a quick lead time.

Decanter Centrifuge use in oil drilling

GN Solids Control Decanter centrifuge use in solid separation for drilling fluid after desilter, which done by the 4 inch hydrocyclone  The drilling mud at this stage may contain solids between 2 to 5 micron and in some case, it contain the barite, the reusable additive.  Decanter centrifuge ‘s purpose is separate this fine solids and recover the barite to achieve purification of drilling mud so it can be sent it back to rig and use it for drilling many times over.

160531-Decanting-Centrifuge

The basic concept of decanter centrifuge is use G-force rotate the bowl “spinning” to create the weight difference so the solids is separate from the mud.  During the high speed spinning in G-force, the solids move in one direction while the mud moves to opposite direction to achieve the separation and two exits below the decanter centrifuge will be one for exit of solid while the other one is for the mud that is done separation. The centrifuge generate centrifugal force amount to 400g~3000g acceleration, only need a short time accomplish the separation process

 

Such process is accomplish by feeding the drilling mud after the separation of desilter and feed the mud into the decanter centrifuge. Decanter centrifuge mainly use for recovering the barite and get rid of small solids in the mud for reduce the solids in the drilling mud.  This step to make sure the function of drilling mud back to near as new as possible, which the drilling rig bit need for continues drilling.

 

Drilling rig need this cleaning step is purposely maintains the cost of the drilling. The maintains of drilling cost is by product.  The main reason is if solids separation is not done properly, the density of small solids will raise and that will seriously affect the drilling bit which will cost raise temperature in the mud and cost damage of the drilling bit and many other types of machinery to over worked and lead to structure damage of the drill rig.

Except for decanter centrifuge ,GN also can provide other solids control equipment such as shear pump, shale shaker , Mud Gas Separator, mud agitator, mud mixing system and drilling waste management equipment,etc ,welcome to contract us to know about our products.

GN solids control come back from international Oil & Gas exhibition

GN solids control showed our equipments successfully in the past month, all the exhibition we showed are famous and professional oil & gas exhibition in the specific region, like OTC in Houston( one of the most professional oil show in the world), MIOGE in Russia ( the biggest oil show in Russia area), Iran Oil Show, CIPPE in Beijing, China, EXPOMIN in Santiago, Chile( the largest mining show in South America), Global Petroleum Show in Canada, the other important oil & gas exhibition will be listed in the next half year.

Especially for the OTC show in Houston, We have 2 stands there, one stand in NRG center, we showed GNLW363C decanter centrifuge, and GNC930D Vertical Cuttings Dryer. The other stand at NRG Arena, we showed GNZS594E-HB shale shaker. Both of the stand in the name of GN Solids America, which is the branch office and warehouse for GN Solids Control.

160506-OTC-Houston-2

MIOGE also showed decanter centrifuge, vertical cuttings dryer and mud cleaner successfully, a lot of drilling companies, oilfield service companies, mud service company showed their interested to work with our equipments.

This is the first time for GN to attend EXPOMIN 2016 in Chile, we showed mining centrifuge GNLW223 and solids removal unit there, and promote this unit to the mining industry clients.

At Iran Oil Show, we showed GNLW363 decanter centrifuge there, this is the best sold model decanter centrifuge in the past years in middle east market.

We have the largest stand at CIPPE 2016, which is the largest and professional oil show in Asia. We showed all the advanced model equipments there, including drilling waste management system, mud recycling unit, mud cleaner, vertical cuttings dryer, decanter centrifuge, shale shaker, shaker screens, etc.

If you would like to visit GN stand in your country or area, pls pay attention to GN solids website, we will announce the lastest exhibition schedule in the official website.