Tag Archives: mud tank


Jet mud mixer is used to element or increase the total drilling fluid, change the drilling smooth density, viscosity, water decline, etc ., all need to drilling fluid material (bentonite, barite powder, etc . ) along with the corresponding chemical additives (polymer, etc . ) into flow tank, if direct investment decision can cause drilling fluid substance and chemical additive a great deal of precipitation or a reunion, could not get scattered, uniform from the drilling fluid.
Jet mud Mixer is with oil drilling mud cleaning system supporting the use of a device, it could meet the 1500 meters to help 6000 meters the destruction of the drilling fluid and also drilling solid control system configuration, slurry oil plane device by a sand pump and a jetting mixing launch with manifold valve interconnection installed on a base of. Risk-free and reliable performance, simple move.
The role in the venturi funnel

If there is not any large pump to use very low viscosity slurry, adding h2o into the drilling mud system, the actual dilution effect can boost the efficiency of the separation devices. You can add any kind of diluent in order to dilute the mud, as well as any mixer to mix having venturi funnel and mud additives, so it can guarantee the steadiness of mud through solids control equipment.
Jet slurry device installation
According to the industry situation, jet slurry system in mud tank aspect or end flat great foundation, the foundation should retain the same level with mud tank foundation.
Jet slurry with hose pump suction device is seated together with the tanks.
Dynamic observation regarding sand pump, turning about the power supply point to is correct.
Tangshan crown machinery co., LIMITED is a professional manufacturer of fly slurry device, welcome shoppers to inquire.

GN solids control come back from international Oil & Gas exhibition

GN solids control showed our equipments successfully in the past month, all the exhibition we showed are famous and professional oil & gas exhibition in the specific region, like OTC in Houston( one of the most professional oil show in the world), MIOGE in Russia ( the biggest oil show in Russia area), Iran Oil Show, CIPPE in Beijing, China, EXPOMIN in Santiago, Chile( the largest mining show in South America), Global Petroleum Show in Canada, the other important oil & gas exhibition will be listed in the next half year.

Especially for the OTC show in Houston, We have 2 stands there, one stand in NRG center, we showed GNLW363C decanter centrifuge, and GNC930D Vertical Cuttings Dryer. The other stand at NRG Arena, we showed GNZS594E-HB shale shaker. Both of the stand in the name of GN Solids America, which is the branch office and warehouse for GN Solids Control.


MIOGE also showed decanter centrifuge, vertical cuttings dryer and mud cleaner successfully, a lot of drilling companies, oilfield service companies, mud service company showed their interested to work with our equipments.

This is the first time for GN to attend EXPOMIN 2016 in Chile, we showed mining centrifuge GNLW223 and solids removal unit there, and promote this unit to the mining industry clients.

At Iran Oil Show, we showed GNLW363 decanter centrifuge there, this is the best sold model decanter centrifuge in the past years in middle east market.

We have the largest stand at CIPPE 2016, which is the largest and professional oil show in Asia. We showed all the advanced model equipments there, including drilling waste management system, mud recycling unit, mud cleaner, vertical cuttings dryer, decanter centrifuge, shale shaker, shaker screens, etc.

If you would like to visit GN stand in your country or area, pls pay attention to GN solids website, we will announce the lastest exhibition schedule in the official website.

GN 500GPM will be Working Successfully in Midsection East

GN Solids Control manufactures various mud techniques which can be used in different worksites, such as oil and gas, HDD, CBM or Bored Pill Drilling etc . One sets involving compact GN 500 GPM mud system is just done the assembling and screening in Middle East within the worksite.
This 500 GPM mud system is used regarding water well drilling intended for water injection. GN technical engineers discussed all the details with this buyer, and provided one custom-made mud system that can be worn out a trailer. GN Solids Control manufactures mud techniques including 250 GPM, 600 GPM and 1000 GPM, drilling waste management equipment . Standard mud systems might be provided in a short time, while many personalized mud systems are all presented based on customer’s special requires.

GN 500GPM water properly mud mixing system is like the following main equipments:
– GN Shale Shaker
Several panels shaker is used since the first phase separation. Shaker screens are also manufactured by GN Solids Control. With the opening up of GN Solids Control, GN will provide more shaker screens to global buyers.
2 . GN Mud Cleaner
GN mud cleaner is often a compact equipment with desander cyclones and desilter cyclones mounted on the top of a shaker. This is also a 2 period separation: desander separate solids larger than 50 microns even though desilter separate solids bigger than 25 microns. All the hydro cyclones are made of polyurethane which can be pretty wear resistance and is used for a long time.
3. GN Centrifugal Pump
There are three sets centrifugal pumps placed on the mud tank. two sets are used to feeding typically the desander cyclones and desilter cyclones separately. And the 3rd shear pump os used to pump the chemicals when matched together with the mixing hopper.
4. GN Mud Tank
GN mud tank is designed and produced to fit in the standard marijuana for the sake of convenient shipping. Each of the ladders, guile rails in addition to lights are also equipped so as to have a safe working environment and operating conveniently.

GN 5TH generation vertical cuttings dryer for waste management

GN Solids Control as China leading manufacturer for solids control equipment, always walks ahead of all solids control companies in China. We just release the 5th Generation vertical cuttings dryer to optimize the user experience and less maintenance.

GN vertical cuttings dryer

GN Solids Control decanter centrifuge have upgraded from 1st generation, 2nd generation, 3rd generation to 4th generation now. In the past several years, GN Solids Control continuously perfects the unsatisfying points and until 3rd generation, GN vertical cuttings dryer is working much fine for drilling waste management. Even heavy mud with lots of sands/ solids, GN vertical cuttings dryer can also work well to satisfy our clients.


The 5th vertical cuttings dryer with fewer footprints can work even in very compact environment. This vertical cuttings dryer is much international in outlooks, similar to Swaco vertical dryers, or CSI VERTICAL dryers.


GN vertical cuttings dryer can be used for oil and gas drilling, HDD drilling, diamond drilling, core well drilling, etc. The vertical cuttings dryer is to remove the big solids above 500microns and reduce the solids content in the waste liquid. In this way, the vertical cuttings dryer can also work for environmental protection industry or farming. The vertical cuttings dryer can treat the night soils from raise pig / raise chickens


Except for vertical cuttings dryer, GN decanter centrifuge is also very high quality and good price equipment. We have project experience to offer over 40 sets centrifuge to one big giant in oil service field. The client offer service for ADCO in Middle East. Except for centrifuges, the oil service giant also bought lots of pumps, grease, and other packages from us. We are base for them in China, and they want GN to be there buyer for smaller item and package for them.


GN Solids Control equipment including mud agitator, Mud Gas Separator, Vacuum Degasser, Mud cleaner, shale shaker is working well for many drilling companies, national oil service companies, national mud engineering companies etc. Pls contact us freely if you need some support.


GN Mud Agitator for Mud Tanks

Recently, we got one mud agitator purchase order from Nigeria client. They give service to several land rigs and have over 5 years solids control service. The Chairman is working for Shell before and after many years field experience, they start the new company. Now, the solids control service company is working well with good reputation.

The mud agitator we designed as per the client’s tank dimension. The agitator shaft length is 3.5m with double impellers for better working performance. The agitator is 11kw motor power drive and direct connection of gearbox and motor, no coupler. This design make the agitator more compact with smaller footprint.

mud agitator

GN Solids Control is complete line of solids control equipment / mud system supplier. We are first China API certified private solids control company; we are first company who set his base to Houston, USA. We are first solids control company who get big contract with Baker Hughes; we are first company with over 70% sales for overseas high end market. We are also leader on solids control equipment standard foundation, and the patent designs optimize the user operation experience a lot.

Recently, we also have another project for HDD mud systems. The 500gpm mud system is complete with mud tanks, shale shakers, mud cleaners, mud agitators, mud guns, centrifugal pumps, mud hoppers etc. The mud system is for Middle East Water well drilling companies. They may drilling 1000m to 2000m in depth and they have 2 sets rotary drilling rigs and 2 sets 1000hp mud pumps. The client have bought one set 200gpm mud system from us in 2013; After they use the mud system for some project and they have a good experience and repeat order for another 2 sets of 500gpm mud system for water well drilling rigs.

GN compact mud system can be used for water well drilling, HDD, CBM etc. Our mud system is exported to Australia, Kuwait, Niger, Egypt, and also some Asia countries.

Mud recycling system for Crossing engineering project

GN solids control equipments and systems are mainly used for 3 applications, including: oil & gas drilling solids control & drilling cuttings waste management, HDD & CBM mud recycling & others sludge separation. Crossing engineering/ civil engineering is one of the major projects for our mud cleaning system applications. We have sold over 50 units of mud recycling system to CPP (China Petroleum Pipeline Bureau) with different treating capacity and configurations for crossing engineering works.

800gpm mud recycling system
The crossing project is not limited to civil engineering crossing, but also includes petroleum pipelines crossing. Recently GN solids control mud recycling system just utilized for oil pipelines transform project in Jinxi, Liaoning province.
According to the Petroleum Pipeline Bureau News center: Langfang company finished the pullback in Jinxi Petrochemical project successfully on Oct.7th , which is the company’s first project through the construction of Jinxi Petrochemical BU project Daqing oil pipeline river crossing project. The project is the construction of hidden trouble reform project by Jinxi Petrochemical Company, starting in the blue sea company and end of Jinxi Petrochemical Company plant, totally need to complete four pipelines in parallel. This River Crossing Project is an important project for the pipeline, they need to implement four pipelines crossing. The project is located at the junction of Jinzhou Economic Development Zone and Lianshan district,The pipeline diameter is 406.4 mm with length of 1098 meters, the design pressure of 6.3 MPa.
The configuration of the mud recycling system as below:
1 double deck shale shaker with 10 inch desander cones GNZJ705-2S
2 double deck shale shaker with 4 inch desilter cones GNZJ705-12N
3 Variable frequency drive decanter centrifuge GNLW452-VFD
4 2 mud tanks with 2 sets of 20ft container sized frame for convenient transportation
GN solids control not only produce, but also designed customized mud recycling system, we are looking forward to discuss with your technical team and provide the best solution for your crossing mud recycling.

Related Posts

Do you know what is a mud gun ?

As a liading muaufacturer for drilling mud solids control & waste management equipment such as mud gun, vertical cutting, screw conveyor, shale shaker, screw pump, mud cleaner, oilfield shale shaker, desander and desilter ,vacuum degasser, decanter centrifuge, poor boy degasser, mud agitator, mud tank,etc. Our product served in over 60 countries, with branches or partner in U.S. ,Russia, Auatralia,Latin America and Middle East.

GN drilling fluid mud gun is a device used to agitate drilling mud on a drilling rig. More of a nozzle than a gun, a mud gun is connected to a pump to circulate the drilling mud and prevent the solids from settling in the mud tank. also depending on the number being used and the pit size. They are best used in tank corners to keep solids from settling and a mud agitator is placed in the tank center.

Mud Gun

GN premium quality mud gun is considered to be one of the longest lasting on the market today.Drilling mud is a wet substance that resembles a thick clay and is used to cool the drill head and carry the remnants of drilling to the surface in water well drilling and oil or gas drilling operations. GN mission mud gun is a inexpensive solution to a potentially expensive problem. Mud is made by mixing water or oil with a clay-like substance that also contains numerous other chemicals into a large tank called the mud tank on a drilling rig.GN mud gun is a 360˚ rotating swivel body, and the ability to be customized to any length, flanged or threaded.

Replacement parts for GN mud guns can be ordered from GN Solids Control Co., Ltd. GN is a fprofessional solids control system manufactuer in china . Any problem please contract us on the web: http://gnsolidscontrol.co