Tag Archives: Decanter Centrifuge

GN Survive with improved solids control technology and better price

GN Solids Control has shown much better confidence to survive in the lower oil price winter. Even, the oil market is very down, GN continuously invest in the product research, product improvement, new technology solids control equipment, and optimize on customer experience.

GN is committed to publish the latest model thermal desorption unit in the first quarter of 2017;

GN is committed to publish the first generation of three phase centrifuge, 14inch bowl centrifuge for oily sludge treatment in first quarter of 2017.

solids-control

GN is committed to publish the hydraulic centrifuge before the end of 2016

GN have a wish and target to become the GN Brand can provide complete solution from the beginning to the end, both for solids control and drilling waste management. The client can have one stop experience, much convenient, high efficient and good price.

According to the sales recently, the first half year of 2016, the popular product now is decanter centrifuges, vertical cuttings dryer, shaker screen, shale shaker and liquid mud plant.

1) Decanter centrifuge is used for solids control. Even the oil price is much lower, there are still some drilling contractor working, and need the centrifuges working in mud cleaning systems. One drilling rigs require at least 2 sets decanter centrifuges, lower speed centrifuge + high speed centrifuges, to meet the requirements from mud engineer.

2) Vertical cuttings dryer. This cuttings dryer can recover the valuable oil based mud and return it back to the active mud tank system. The separated dry cuttings can be transported to Thermal desorption unit for final treatment.

3) Shaker screen is wearing parts for shale shaker. Even the unit price is only less than hundred dollars, but the screen qty is relatively large, the value is larger than other parts. We sell replacement screens for different model shale shakers.

4) Liquid mud plant. This can service for several drilling rigs, to supply ell prepared drilling mud for direct use.

Advertisements

Mobile mud system transportation wit 40 foot trucks

GN Solids Control can offer solids control gear, drilling waste management gear and mud tank system. Regarding the mud tank system, here we talk about stream-lined drilling  mud system for HDD, water well drilling and so on
Unlike oil drilling internet site, the HDD project or perhaps water well drilling undertaking may stay in one web-site for only two weeks or a month, they will move from one site to another. Almost all of client prefer to mobile mud mixing system which can be locked upon 20ft truck or 40ft truck.
Mobile mud system
Recently, we have one particular client from West South africa who is busy with normal water well drilling to improve the regional water situation. And he have to have 40ft truck mobile mud system to working together with the actual Drillmec rig from Italia. The mud system such as below parts:
1) a few panel shale shaker GNZS73E-DZ, this is the most popular shaker product for non oil gasoline drilling field. The shaker is much mature product that have been working in market for over a decade. Even, we do some betterment every year, it is still vintage model and we will not end the manufacturing of this unit.
2) 3 panel mud cleaner GNZJ703E-D1S8N. This is mix of shale shaker, desander cone and desilter cones. This is certainly compact design three in a unit with much better functioning performance. If the client would rather cheaper price desander device and desilter unit, you can offer desander and desilter without down steam shale shaker. But the performance probably that good.
3) 3 pieces centrifugal pump installed inside the tank recess position. 1 centrifugal pump for giving the desander cones, one particular centrifugal pump for providing the desilter cones along with another one for mixing hopper.
4) 1 set submersible slurry pump for providing the shale shaker, sucking by mud pit. This pump is much more anti-corrosive than centrifugal pump.
5) 1 placed 10m mud tank to aid all equipment above. Along with the tank system can be put within a 40ft truck for method of travel.

ATEX/DNV Decanter Centrifuge deliver to Europe

Europe marketplace has much higher standard with regard to equipment importing from exterior countries. As China primary brand, GN continuously upload solids control equipment to help Europe clients with greater standard and high quality items. This month, we just give some sets of centrifuges with Atex/DNV certificate.

GN Solids Control Decanter Centrifuge with below features:
Type: GNLW363CG-VFD
Compliance with The european union CE certification
Electrical control panel compliance with ATEX EX proof certification
Working out with ears compliance with DNV GL certification

GN Solids have been working in solids control equipment & mud cleaning system field for many years. The production method is very strict and conformity with API Q1, ISO 9001, HSE etc . restrictions. We only source coming from top brand component substance and our equipment high quality is also premium with excellent performance.
decanter centrifuge
Decanter centrifuge is critical equipment working for oil drilling mud system. Most of buyer will need 2 sets centrifuge for operation. The combined centrifuge system including a single set high speed centrifuge regarding lower gravity solids treatment; one set lower rate or middle speed centrifuge for high gravity solids removal; screw pump intended for feeding the dual centrifuge will be also concluded, along with telescopic high skid to get installation. We have one consumers from West Africa, that they bought 2 sets GNLW363 14inch bowl centrifuge, the first is fix speed centrifuge; the opposite one is variable speed centrifuge. The fix speed centrifuge with middle speed 2200RPM, much better for middle dimensions solids removal. The changing speed centrifuge can be used several size particles separation simply by different speed. The adjustable speed centrifuge VFD control panel can adjust the pan speed, conveyor speed along with pump feeding speed really flexible.

Except the 14inch bowl centrifuge, GN Solids control also has other unit centrifuge for option:
in search of inch bowl centrifuge with regard to diamond/ mining drilling
18inch bowl centrifuge for rapidly drilling
22inch bowl centrifuge for some special requirements.

When you need some centrifuges or solids control equipment, pls email us freely.

GN MIX HOPPER

Jet mud mixer is used to element or increase the total drilling fluid, change the drilling smooth density, viscosity, water decline, etc ., all need to drilling fluid material (bentonite, barite powder, etc . ) along with the corresponding chemical additives (polymer, etc . ) into flow tank, if direct investment decision can cause drilling fluid substance and chemical additive a great deal of precipitation or a reunion, could not get scattered, uniform from the drilling fluid.
Jet mud Mixer is with oil drilling mud cleaning system supporting the use of a device, it could meet the 1500 meters to help 6000 meters the destruction of the drilling fluid and also drilling solid control system configuration, slurry oil plane device by a sand pump and a jetting mixing launch with manifold valve interconnection installed on a base of. Risk-free and reliable performance, simple move.
The role in the venturi funnel

GN MIX HOPPER
If there is not any large pump to use very low viscosity slurry, adding h2o into the drilling mud system, the actual dilution effect can boost the efficiency of the separation devices. You can add any kind of diluent in order to dilute the mud, as well as any mixer to mix having venturi funnel and mud additives, so it can guarantee the steadiness of mud through solids control equipment.
Jet slurry device installation
According to the industry situation, jet slurry system in mud tank aspect or end flat great foundation, the foundation should retain the same level with mud tank foundation.
Jet slurry with hose pump suction device is seated together with the tanks.
Dynamic observation regarding sand pump, turning about the power supply point to is correct.
Tangshan crown machinery co., LIMITED is a professional manufacturer of fly slurry device, welcome shoppers to inquire.

GN High Speed Decanter Centrifuge Used for Waste Water Separating

As more and more GNLW series decanter centrifuges are employing in oil and gas drilling in addition to drilling waste management devices, GN Solids Control occasionally are regarded as a professional centrifuge manufacturer, and some clients are utilizing GN centrifuge in additional industries as sludge parting, waste water separation along with other applications.
Comparing with drilling waste management systems, the actual separation of waste h2o need the decanter centrifuge to be effective at a comparably lower differential speed, which is also the speed with regard to conveying the solids cycle in the bowl.
Why? Obtain a high differential speed?
1 ) First of all, a high speed to get conveying the material may combine the liquid and the solids, and the whole decanter centrifuge can be working as a mud agitator, in this case, the centrifuge is not really an efficient separation equipment.

decanter centrifuge
second . Secondly, in order to treat the particular waste water, the end end user need to add some chemical in the material, to change the size possibly the chemical composition of the squander water. In condition of a superior differential speed, the practical chemicals may be discharged alongside the liquid at the liquid shop.
3. Thirdly, when there is substances in the material to be dealt with, and the centrifuge’s differential pace is high, there would be rather much of bubbles and foams. It would give negative have an impact on on the separation result.

GNLW363CG-VFD is an idea choice for that waste water separation plans, because this is the highest normal decanter centrifuge internationally, GN uses best material for any decanter centrifuge bowl while SS2205 which is more good and more anti-corrosive.
And for the particular control panel, GN possesses positive pressurized control panel for easily choose the acceptable bowl speed and differential speed. When the aimed dish speed and differential pace are entered into the PLC control panel, the program may calculate out a suitable rear motor speed automatically.
Might you need more information, pls speak to GN Solids Control.

14’’ drilling fluids decanter centrifuge about Iran oil show with regard to Iran oilfield

GN 14’’ popular size decanter centrifuge and 18’’ big dish decanter centrifuge are trusted in Iran oilfield.
Performs of GN 14’’ common size decanter centrifuge along with 18’’ big bowl decanter centrifuge
1) They can be utilized after shale shaker, desander, desilter and mud cleaner, to recovery the barite from drilling fluids and lessen the mud weight.
2) They can be used after drilling waste vertical cuttings dryer or drilling waste excessive G dryer shale shaker, to separate your lives the ultra fine solids from drilling mud, and also the mud qualified to get reuse and drilling.
3) The centrifuges can also be used soon after chemical dosing system, as being a dewatering system, to remove often the ultra fine solids by drilling fluids. It can value to reduce the solids content with mud.

GN centrifuge at iran oil show
Teheran oil present is the largest international olive oil show in Iran to get worldwide buyers and companies. Mast of the Iranian acrylic field companies, like drilling companies, mud service firms, drilling mud suppliers, oilfield equipment and tools distributor will come for the show to achieve clients as well as suppliers.
As the utmost popular size decanter centrifuge, GN Solids Control has its own GNLW363CG and GNLW363C-VFD centrifuges running in Iranian oilfield. Many of them are at NIOC and NIDC jobsite. In order to let the Iranian clients have more understanding about GN high quality decanter centrifuge, GN Solids Control needs a popular size 14’’ dimensions decanter centrifuge for the Teheran oil show. Clients along with check the centrifuge design and also quality on the show along with talk with GN Solids Control engineers face to face.
GNLW363C is really a 14’’ size decanter centrifuge. GN offers fixed pace control as well as VFD control for the centrifuge. GN superior design VFD panel will be high praised by the work site.
1) The VFD control panel is with PLC with regard to smart control. The VFD panel can be connected to personal computer for remote control. User can know the centrifuge efficiency at office.
2) It really is positive pressurized for do it yourself cooling. Air conditioner type VFD panel is also available coming from GN Solids Control. It really is especially suitable for high temperature location, like the gulf countries a

Often the Return of the King-GN Solids America Back from OVER-THE-COUNTER

GN Solids America LLC just got back from the 2016 OTC show. Many old and also new friends came to GN booth and discussed hotly on all those GN accessories exhibited.
As a top top manufacturer from China, GN Solids America LLC is a part company of GN Solids Control. It’s been a convention for GN attending OVER THE COUNTER with two booths annually. In the 2016 OTC display, GN Solids Control possesses a booth in Center, everywhere one decanter centrifuge GNLW363 and one cuttings dryer GNCD930D are exhibited. GN Solids America also has another interpreting booth in Arena to exhibit shale shaker and shaker displays.

2016 OTC decanter centrifuge
2016 OTC decanter centrifuge

GN Solids America got sent huge invitation words to GN valuable buyers before the opening of 2016 OTC show. Many clients found see GN solids control and drilling waste management equipments especially. We’re extremely glad to say there were 2 purchase orders on the decanter centrifuges made during this display.
GNLW363 decanter centrifuges are generally widely used in over 61 countries; the excellent working efficiency and convincing quality support GN to get many requests before. GN decanter centrifuge has two operating function: one is fix speed along with a hydraulic coupling; the other is actually a variable speed which can alter speed easily on the control panel.
Two decanter centrifuges were purchased, and some various other GN equipments were also sketched great attention. Many companies demonstrated keen interest on GN cuttings dryers to separate their very own slurry and recycle waters. GN shaker screens had been also purchased during this show by simply some drilling companies. We could pretty confident that these drilling companies will keep acquiring from GN after they examination GN shaker screens.
Many solids control equipments for instance shale shakers, shear pump, decanter centrifuges and also shaker screens are stocking in Houston warehouse. For that shaker screens that use a good deal, GN keeps delivering via Chinese factory in order to provide a quick lead time.