All posts by mudcleaner

GN Solids America LLC’s GNSB Centrifugal Pump

GN Solids America LLC is proudly offers the world with drilling mud centrifugal pump. We are an exporter from China and United States of drilling fluid centrifugal pump for oil companies in India, Russia, Middle East, Turkey, Venezuela, and Indonesia, the United Arab Emirates, Turkey and Africa countries.

The GNSB series centrifugal pump has been designed and manufactured for petroleum drilling field for supporting solids control equipments. It adopts the axial suction structure and all the hydraulic components are fraction-resisting cast iron, which is suitable for delivering the acid-like liquids with suspended particles in well drilling or other similar fluids.

When begin concept-thinking for the centrifugal pump, its specifications were fully thought that the complete solids control machinery that can work under the any operating situation. It is endowed with high communality of parts, operating reliability, durability and convenient maintenance-performing

The GNSB series centrifugal pump is equipped with auxiliary impeller so the seal is more reliable. The pump is used the lip seal, immersion asbestos and rubber square coil seal, the therefore the seals are maintained conveniently.

GNSB series centrifugal pump is GN Solids America LLC’s proud machinery according to the best construction situation available from the manufacture for metal wear-resistant sand pump.

Structural features:

1 GNSB series metal wear-resistant sand pump mainly composed of pump body, impeller, and guard board; pump cover, bracket and bearing assembly.

2 The cast of the pump body, impeller and guard board use non-metal wear-resistant material.

3 The centrifugal pump shaft seal use packing seal, and the high pressure washing clear water be added into packing chamber, better to ensure the normal operation of pump.

4 To look-in from the inlet direction for counterclockwise, from inlet to see pump export in horizontal direction right hand, according to the need, outlet can be adjust in 360 degrees.

GNYD200A flare Igniter

Flare Ignition Device manufacture by GN Solids America LLC is for blown down fuel gas designed and manufactured by us is used in burn down excess natural gas. The flammable  gas from collecting and distributing station of natural gas and from oil refinery and  its being a security and environmental protection equipment. It used for have the blown down harmful gas ignited and burned to prevent the environment and security from being endangered. The flare ignition device, may be paired with GNZYQ 1000A Mud Gas Separator. And now, as a developed product it has been extensively used in petroleum drilling operation.

As said before,  Flare Igniter Device is the safety and environmental protection equipment for handling vented explosive gas. It can ignite the toxic combustible gas timely and accurately.

 Flare Igniter operation safety steps for oil drilling sites

1The flammable gas conveyed to the air intake of gas burner (torch) through the pipeline installed at the safe area.
2. Connect and start current transformation of flare ignition device and electric circuit of voltage amplification.
3. Open the liquefied gas pot and ignite fire-leading tube through operating electronic igniter (ignition at 1st stage), or with the fire-leading gas valve of emptying gas directly opened, ignite fire-leading tube through electronic igniter (ignition at 1st stage).
4. Open gas blown down valve and ignite the blown down gas through the flaming fire-leading tube (ignition at 2nd stage).
5. Have the liquefied gas pot closed with fire-leading tube put out, letting the blown down flammable gas to freely burning.

GN Solids America LLC is manufacture who produce full set of solids control machinery, Oil Sludge Treatment,custom mud system, supportive machinery.  Over 60 plus countries around have use our machinery in many years and give us repeat order business.

Decanter centrifuge and centrifugal pump

GN Solids America, a US subsidiary of GN Solids Control which specializes in manufacturing equipment and parts applied in the area of drilling solid control and waste management, was established in 2014 in Houston, TX. Since establishment, it performed as the company’s North America sales, assembly center and warehouse.

GN Solids America’s product range covers shale shaker, mud cleaner, centrifugal pump,decanter centrifuge, cutting dryer and so on. We can be your one stop shop for the products in the solid control and waste management area. And all of our products are of high quality, worry-free, certified by API, ISO, CE, TP TC, and have been sold to more than 60 countries, many of them are world famous, like BAKER HUGHES, SCOMI, COSL, EMEC, etc. Annually GN’s facility in China can manufacture 300 sets of shale shaker , 200 set of decanter centrifuge, 100 sets of cutting dryer. Now the screen facility can make 5000 pieces of shaker screen annually and will expect this number to be tripled after our new facility into production.

Our North American HQ is just in the global energy center, Houston, TX, which can perform as the manufacturing facility, warehouse, after sales service center and guarantee the quick delivery of the products and quick response to the customer’s inquiry.

Now we have plenty of shaker screens in stock in Houston facility, the screens can also be replaceable with DERRICK, MI-SWACO and BRANDT. We also have many equipment for sale, such as the shale shaker, cutting dryer, decanter centrifuge, mud cleaner, and some centrifugal pump and agitators, welcome to send your inquiries to us or have a tour to our Houston facility. We can show you more about our company and products.

We will try our best to assist your business to be successful. Welcome to visit

Waste water treatment decanter centrifuge for sale in China

As a professional manufacturer of waste water treatment decanter centrifuge in China, GN solids control brand decanter centrifuge can be used for different applications, as industry waste water treatment, oil waste water treatment, drilling fluids cleaning, oil recovery, barite recovery, low gravity solids separation, high gravity solids separation, etc.

The most important technical specs for the waste water treatment decanter centrifuge is the ratio of bowl length/ bowl diameter. The longer the ratio is, the better the treatment performance it is. The longer the ratio is, the difficult of the production process is, because you need high advanced technology to finish the balancing process. GNLW224 decanter centrifuge is the waste water treatment decanter centrifuge compared with GNLW223 decanter centrifuge. Their bowl diameter are both 9 inch, just GNLW224 centrifuge with longer bowl length 35 inch, but GNLW223 centrifuge with bowl length 20 inch. The ratio of the GNLW224 centrifuge is 4, but the ratio for GNLW223 centrifuge is 3. GNLW223 centrifuge is mainly used for mining diamond core drilling waste water treatment, the effective treating capacity is 100L/min , the max treating capacity is 130L/ min. The same as GNLW363CG centrifuge and GNLW364D centrifuge, the ratio for GNLW363 is 4 but the ratio of GNLW363 is 3. For 18inch bowl centrifuge, we have GNLW452, GNLW453, GNLW454 for option, normally GNLW452 decanter centrifuge is used to recover the barite from the used drilling fluids, GNLW453 decanter centrifuge is used to recover the useful drilling fluids from the used drilling fluids, GNLW454 is used to treat the oil sludge or waste water treatment by working together with chemical dosing system. For 22 inch bowl decanter centrifuge, we have GNLW553 and GNLW554 for option, they are used to treat the oil sludge, waste water with dewatering unit. Welcome to inquiry GN solids control for waste water treatment.

GN Survive with improved solids control technology and better price

GN Solids Control has shown much better confidence to survive in the lower oil price winter. Even, the oil market is very down, GN continuously invest in the product research, product improvement, new technology solids control equipment, and optimize on customer experience.

GN is committed to publish the latest model thermal desorption unit in the first quarter of 2017;

GN is committed to publish the first generation of three phase centrifuge, 14inch bowl centrifuge for oily sludge treatment in first quarter of 2017.


GN is committed to publish the hydraulic centrifuge before the end of 2016

GN have a wish and target to become the GN Brand can provide complete solution from the beginning to the end, both for solids control and drilling waste management. The client can have one stop experience, much convenient, high efficient and good price.

According to the sales recently, the first half year of 2016, the popular product now is decanter centrifuges, vertical cuttings dryer, shaker screen, shale shaker and liquid mud plant.

1) Decanter centrifuge is used for solids control. Even the oil price is much lower, there are still some drilling contractor working, and need the centrifuges working in mud cleaning systems. One drilling rigs require at least 2 sets decanter centrifuges, lower speed centrifuge + high speed centrifuges, to meet the requirements from mud engineer.

2) Vertical cuttings dryer. This cuttings dryer can recover the valuable oil based mud and return it back to the active mud tank system. The separated dry cuttings can be transported to Thermal desorption unit for final treatment.

3) Shaker screen is wearing parts for shale shaker. Even the unit price is only less than hundred dollars, but the screen qty is relatively large, the value is larger than other parts. We sell replacement screens for different model shale shakers.

4) Liquid mud plant. This can service for several drilling rigs, to supply ell prepared drilling mud for direct use.

Mobile mud system transportation wit 40 foot trucks

GN Solids Control can offer solids control gear, drilling waste management gear and mud tank system. Regarding the mud tank system, here we talk about stream-lined drilling  mud system for HDD, water well drilling and so on
Unlike oil drilling internet site, the HDD project or perhaps water well drilling undertaking may stay in one web-site for only two weeks or a month, they will move from one site to another. Almost all of client prefer to mobile mud mixing system which can be locked upon 20ft truck or 40ft truck.
Mobile mud system
Recently, we have one particular client from West South africa who is busy with normal water well drilling to improve the regional water situation. And he have to have 40ft truck mobile mud system to working together with the actual Drillmec rig from Italia. The mud system such as below parts:
1) a few panel shale shaker GNZS73E-DZ, this is the most popular shaker product for non oil gasoline drilling field. The shaker is much mature product that have been working in market for over a decade. Even, we do some betterment every year, it is still vintage model and we will not end the manufacturing of this unit.
2) 3 panel mud cleaner GNZJ703E-D1S8N. This is mix of shale shaker, desander cone and desilter cones. This is certainly compact design three in a unit with much better functioning performance. If the client would rather cheaper price desander device and desilter unit, you can offer desander and desilter without down steam shale shaker. But the performance probably that good.
3) 3 pieces centrifugal pump installed inside the tank recess position. 1 centrifugal pump for giving the desander cones, one particular centrifugal pump for providing the desilter cones along with another one for mixing hopper.
4) 1 set submersible slurry pump for providing the shale shaker, sucking by mud pit. This pump is much more anti-corrosive than centrifugal pump.
5) 1 placed 10m mud tank to aid all equipment above. Along with the tank system can be put within a 40ft truck for method of travel.

ATEX/DNV Decanter Centrifuge deliver to Europe

Europe marketplace has much higher standard with regard to equipment importing from exterior countries. As China primary brand, GN continuously upload solids control equipment to help Europe clients with greater standard and high quality items. This month, we just give some sets of centrifuges with Atex/DNV certificate.

GN Solids Control Decanter Centrifuge with below features:
Compliance with The european union CE certification
Electrical control panel compliance with ATEX EX proof certification
Working out with ears compliance with DNV GL certification

GN Solids have been working in solids control equipment & mud cleaning system field for many years. The production method is very strict and conformity with API Q1, ISO 9001, HSE etc . restrictions. We only source coming from top brand component substance and our equipment high quality is also premium with excellent performance.
decanter centrifuge
Decanter centrifuge is critical equipment working for oil drilling mud system. Most of buyer will need 2 sets centrifuge for operation. The combined centrifuge system including a single set high speed centrifuge regarding lower gravity solids treatment; one set lower rate or middle speed centrifuge for high gravity solids removal; screw pump intended for feeding the dual centrifuge will be also concluded, along with telescopic high skid to get installation. We have one consumers from West Africa, that they bought 2 sets GNLW363 14inch bowl centrifuge, the first is fix speed centrifuge; the opposite one is variable speed centrifuge. The fix speed centrifuge with middle speed 2200RPM, much better for middle dimensions solids removal. The changing speed centrifuge can be used several size particles separation simply by different speed. The adjustable speed centrifuge VFD control panel can adjust the pan speed, conveyor speed along with pump feeding speed really flexible.

Except the 14inch bowl centrifuge, GN Solids control also has other unit centrifuge for option:
in search of inch bowl centrifuge with regard to diamond/ mining drilling
18inch bowl centrifuge for rapidly drilling
22inch bowl centrifuge for some special requirements.

When you need some centrifuges or solids control equipment, pls email us freely.